Recently, a Reddit user posted that the AMD Radeon RX 7900 XTX reference graphics card was hitting 110C Junction temps while playing the new Modern Warfare II. However, when Contact AMD with an RMA requestHe denied, as the company stated that “temperatures are normal, and in case of any problem, please contact us again.” Another user placed a successful order but the previously opened refund was denied. The company has since received a bit of a backlash for the issue, especially with the growing number of issues arising.
More high temperature cases continue to crop up on AMD Radeon RX 7900 XTX graphics cards, with companies like PowerColor stepping up to help consumers.
Prior to this new AMD development, NVIDIA received backlash for Overheating and melting of 12VHPWR connectors On the flagship NVIDIA GeForce RTX 4090 GPU, which is over thirty and reported instances of problems occurring after the launch of the graphics card.
What’s unique about AMD’s situation is that it currently affects the reference and AMD’s Radeon RX 7900 series of GPUs. It covers any cards sold by AMD partners or the company but does not cover GPUs specifically designed using the same graphics architecture. Few coolers or mounting designs are expected to be defective as shown by De8auer in the video below:
Three years ago, AMD published an article on the company’s blog titled “AMD Radeon Community Update: More Control over GPU Power and Performance, Improved Thermal Monitoring, Maximum Performance.” When discussing junction temperatures in the AMD Radeon VII GPU Enhanced Thermal Monitoring, they posted this statement:
…instead of setting a mild, “worst-case” throttling to the death of the entirety, Radeon TM RX 5700 GPUs will continue to opportunistically and forcefully increase the clocks until any of the many available sensors reach their “hotspot” or “crossover” temperature 110 degrees Celsius. It is expected to operate at up to 110°C during typical gaming use and within specifications. This allows the Radeon TM RX 5700 GPUs to deliver significantly higher performance and clocks out of the box, while still maintaining the audio and reliability goals.
one of The technical architecture drives the AMD Radeon RX 7900 XTX, “Kevin,” mentions that as of yesterday, the company has been aware of the hotspot issue and is actively investigating and developing a work plan for “re-collecting and collecting serial numbers.” He further explains that the current overseas COVID situation is slowing the process but agrees that a mechanical issue would fall under creating and fulfilling an RMA for consumers. However, they also look into firmware updates to fix isolated incidents where a software fix is necessary rather than a hardware replacement. “Kevin” also discusses edge heating, the temperature near the silicon edge on the GPU, stating that edge temperatures of 90 degrees are not normal, but edge temperatures of 70 degrees are nominal.
Reddit user f powercolor A representative on the platform, “PowerColorSteven,” is doing his part to help consumers with this current issue about AMD Radeon RX 7900 XTX graphics cards. For those who may not remember Stephen, we mentioned V This article The company had previously encountered an issue where AMD RX 6700 XT-series GPUs were shipped with thermal pad covers still installed, which at that time could cause high graphics card temperatures. The sales rep has been monitoring this issue closely for the past couple of days and recently posted it as a pinned thread reddit:
Uh…just adding this here in case no one has seen my other posts.
If you are dealing with a 110c problem and no one else is helping you with the problem. No matter which (AIB I bought this from) I bought it from. Send me an email or DM (because my emails aren’t working properly today) (also, please don’t use chat, that shit isn’t working right). I’m compiling a list of my AMD contacts on how many issues we’re seeing. They asked if the number of users was few. I told her more than a handful, so now I need to show some kind of support for my chubby mouth. Send me the serial numbers. I am emailing the AMD guys with the number of units affected. powercolor. sapphire. GB. AMD Direct. whatever. Send me the serial numbers. Hopefully AMD gets some news for all of us, but regardless, when I hear something substantial I’ll do a post to provide some level of guidance on how to do this.
– User “PowerColorSteven”, aka “salesperson or something” on Reddit
However, it is difficult to know which companies accept and fulfill the RMA, as the number of recorded cases stated that some were allowed while others were denied, even when it is the same manufacturer. Several other theories about the problem also emerge, from uneven cold plates to using a graphite heat pad to fix the problem. With the number of cases rising during the initial reports, it is not recommended to mitigate the issue but to wait until an official statement or acceptance of a chain-level RMA by AMD is allowed.
“Freelance web ninja. Wannabe communicator. Amateur tv aficionado. Twitter practitioner. Extreme music evangelist. Internet fanatic.”